Torlon 4203L Technical Data

Technical Specification
 
ASTM
Test Method
Torlon 4203
Property
Units
Specific Gravity
D792
-
1.40

Water Absorption Saturation in water

D570
%
3.5

Tensile Strength

D638
N/mm²
192
Tensile Modulus
D638
N/mm²
4900
Elongation
D638
%
15
Flexural Strength
D790
N/mm²
244
Flexural Modulus
D790
N/mm²
5000
Impact - Izod Notched [23°C, 50% RH]
D256
J/M
142
Hardness
Rockwell
-
E86
Shore D
-
-
Melt Point
D2117
°C
-
Max allowable service temp in air

- for short periods (1)

-
°C
260

- continuously for 20000hrs (2)

-
°C
230 -260
Minimum Service Temperature
-
°C
-190
Linear thermal expansion coefficient
D696
K­-1x 10-­5
3.06
Thermal Conductivity
C117
W/K.M
0.26
Flammability
D635
-
-
UL (thickness in mm) [Tests carried out using UL test methods by DSM EPP].
UL-94
-
V - 0 (1.17)
Volume Resistivity
D257
Ohm.cm
2 x 1015
Dielectric Strength (3)
D149
kv/mm
23.6
Outside applications - UV resistance
-
-
C
Acids - Strong [pH < 3]
-
-
A
Alkalis - Strong [pH > 11]
-
-
C
Chlorinated Hydrocarbons
-
-
-
Hot Water
-
-
A
  • (1) Only a few hours, with little or no load applied
  • (2) After these periods mechanical properties reduce by approx 50%. Note, however, that service temperatures are load and time dependant.
  • (3) Test specimen 1.6mm thick unless otherwise stated.
  • 'A' No attack
  • 'B' Mild attack by absorption
  • 'C' Dimensional change due to absorption
  • 'D' Decomposition in short time
  • 'E' In steam - at 160°C, decomposition after short time