TIVAR^® UV RESISTANT

 

• For outdoor applications
• Retains key properties up to three times longer

 

Modified TIVAR^® formula for enhanced stability in outdoor applications. While non-UV formulations are suitable for unexposed situations, TIVAR^® UV Resistant retains its low-friction surface, resistance to wear, corrosion resistance and impact strength up to three times longer.

TIVAR^® UV Resistant is available in sheet.

 

 

Technical Specification Table

Property	Method	SI Unit	SI Value
Density	ASTM D-792	g/cm3	0.953
Yield Point	ASTM D-638	MPa	20
Elongation at Yield	ASTM D-638	%	15
Tensile Break	ASTM D-638	MPa	45
Elongation at Break	ASTM D-638	%	290
Tensile Modulus	ASTM D-638	MPa	913
Flexural Modulus	ASTM D-790	MPa	723
Izod Impact (Charpy Notched Impact)	ASTM D-4020	kJ/m2	113
Tensile Impact	DIN 53448	kJ/m2	3096
Sand Wheel Wear	ASTM G-65	T-1000=100	113
Hardness	ASTM D-2240	Shore D	69
Static Friction	ASTM D-1894	Unitless	0.18
Dynamic Friction	ASTM D-1894	Unitless	0.15
Coefficient of Thermal Exp	ASTM D-696	°C-1	0.00018
Melt Point	ASTM D-3417	°C	137-143
Compressive Modulus	ASTM D-695	MPa	na
Compressive Deformation	ASTM D-621	% at 454.5kg	na
Volume Resistivity	ASTM D-257	Ohm-cm	>1015
Surface Resistivity	ASTM D-257	Ohm	>1015
Water Absorption	ASTM D-5706	%	nil