ACRYLITE® GMS ACRYLIC SHEET

MIL-P-5425

 

DESCRIPTION

ACRYLITE GMS Aerospace Acrylic Sheet is manufactured to meet or exceed the requirements of military specification MIL P-5425E.  ACRYLITE GMS sheet is manufactured in equipment that is reserved for aerospace acrylic products, is subjected to a preshrunk cycle, and undergoes an optical inspection which is among the most critical in the industry.  When drape forming ACRYLITE GMS sheet, excellent results can be achieved if the sheet is heated evenly between 300°F and 320°F.  For pressure forming or vacuum forming operations temperatures of 340°F to 380°F are recommended

 

Technical Data

The table below shows typical values for 0.250 inch thick ACRYLITE GMS sheet.  Some values will change with thickness.

 

TEST                                      METHOD                              TYPICAL VALUES*

ANGULAR DEVIATION                    ASTM D-637                                        <3 minutes

TENSILE STRENGTH                         ASTM D-638                                        11,000 psi

ELONGATION                                     ASTM D-638                                        5.7%

FLAMMABILITY                                ASTM D-635                                        1.25 inch/min

DEFLECTION TEMPERATURE        ASTM D-648                                        115°C

 (264 psi)

INTERNAL STRAIN                           MIL P-5425E                                         <1%

RESISTANCE TO WEATHERING     MIL P-5425E and

                 (10 days accelerated)          ASTM D-1003                                      Before                   After      

LIGHT TRANSMISSION                                                                    92.6%                     92.3%

HAZE                                                                                                     0.40%                     0.40%

SPECIFIC GRAVITY                            ASTM D-792                                        1.19

THERMAL EXPANSION                   ASTM D-696                                        0.000061 in/in-°C

WATER ABSORPTION (24 hr)         ASTM D-570                                        0.33%