Home All Products ABS Acetals POM Delrin® Acrylic PMMA Acetate-CAB Buna Rubber Tubing Carbon Fiber Products Celazole® PBI Ceramics - Mica (High Temp) Cirlex® Polyimide CPVC ECTFE EVA Ertalyte® PET-p ETFE - Tefzel® FEP Fluoropolymers Fiberglass-FRP Fluorosint® Fluran® Tubing G10/FR4, G11/FR5, CE, LE, G5, G7, G9, XX Phenolics & Laminates Graphite HDPE HIPS-Polystyrene Hytrel® Sheets Kapton® Kevlar® Kydex® Lexan® LDPE LLDPE-Linear Low Mica High Temp. MDPE Tubing Mylar® Neoprene Nomex® Films Norprene® Tubing Noryl® Nylon Nylatron® PBT PCTFE Peek Pes Sheet Petg PES Sheets PFA-Fluropolymers Pharmed® Tubing Plexiglas® Polycarbonate Polyester Polyimide Polypropylene Polystyrene Polysulfone Polyurethane-TPU PPS PTFE PVC PVDF Pyropel® Polyimide Rubber Products Rulon® Santoprene® Silicone Sintimid® Teflon® Torlon® TPX Tygon® Tubing Tygothane® Tubing UHMWPE Ultem® PEI Versilic® Vespel® Polyimide Welding Rods Versilic® Tubing Zelux® Stainless Steel, Carbon, Chrome, Tungsten, Titanium Balls Credit Application Domestic Selling Policy Contact Kmac Plastics Privacy Hoses Metal Balls Metal Sheets, Rods, Tubes, Bars       Goods and services provided by K-mac Plastics (MI, USA). Sold by 2CheckOut.com Inc. (Ohio, USA). Plastic Links Plastic Rods, Tubes and Sheets Pinewood Derby Cars Circuit Breakers Texas Longhorns Drill Bits Set Screws Taper Pins

Vivak Technical Data     Typical values Units Test method Physical Density 1.27 g/cm³ DIN 53479 Moisture absorption: - 23°C, 24h immersion (3 mm) 0.2 % Index of refraction n D at 20°C 1.57 DIN 53491 Light transmittance (2 mm sheet) 88 % DIN 5036 Mechanical Tensile stress at yield 50 N/mm² DIN 53455 (1) Elongation at yield 5 % DIN 53455 (1) Tensile strength 26 N/mm² DIN 53455 (1) Elongation at break >100 % DIN 53455 (1) Tensile modulus of elasticity 2050 N/mm² DIN 53457 (2) Limiting flexural stress 77-83 N/mm² DIN 53452 Impact strength: - Charpy unnotched no break J/m² DIN 53453 - Charpy notched 16 J/m² DIN 53453 - Izod notched (4 mm) 90 J/m ASTM D256 Instrumented impact (4 mm) at F max 28 J ASTM D3763 Rockwell hardness R104-R117 rating ASTM D785 Thermal Glass transition temperature 81 °C Thermal conductivity (l) 0.32 W/m°C DIN 52612 Coeff. of linear thermal expansion 0.050 mm/m°C Heat deflection temperature under load acc. to SO/R75 DIN 53461 - method A: 1.81 N/mm 2 63 °C - method B: 0.45 N/mm 2 70 °C Max. service temperature in air (3) 65 °C Min. service temperature -40 °C Electrical Dielectric strength (4) 20 Kv/mm IEC 243-1 Volume resistivity 1015 Ohm.cm DIN 53482 Surface resistivity 1016 Ohm DIN 53482 Dielectric constant at 10³ Hz 2.6 - DIN 53483 Dielectric constant at 106 Hz 2.4 - DIN 53483 Dissipation factor at 10³ Hz 0.005 - DIN 53483 Dissipation factor at 106 Hz 0.020 - DIN 53483 Flame   Oxygen index 26 % ASTM D2863 Flammability (3 mm sheet) V-2 (6) rating UL 94 Glow wire test (2 & 3 mm) 850 °C IEC695-2-1 Germany - 0.5 to 8 mm sheet B1 rating DIN 4102/part1 - 4 mm sheet S4/SR2/ST1 rating DIN 5510 DIN - 5 & 6 mm sheet S4/SR2/ST2 rating 5510

UHMWPE Cut to Size up to 6.0" Thick HDPE Colored Sheets Tapes Hoses U Channels Eyebolts Threaded Rods Self Drilling Screws Carriage Bolts Dowel Pins Lag Screws Spring Pins   Springs Tube Caps & Plugs Square Watermelon Growing Cases Acrylic Colored Pig Pipes

Note: Sample Charges may apply on particular non stock items! Compare Technical Differences on Plastic Properties   K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548  Privacy   Contact Kmac Plastics    Domestic Selling Policy 616-406-0671   616-406-0682 fax   Acrylic Sheets, Rods, Tubes Abs Sheets Acetal POM Sheets Nylon Rods Polypropylene Sheets Polycarbonate Tubes Pbt Sheets Pbt Sheets Tpe Santoprene Sheets