Home All Products ABS Acetals POM Acrylic PMMA Acetate-CAB Buna Rubber Tubing Carbon Fiber Products Ceramics - Mica (High Temp) Cirlex® Polyimide CPVC EVA Ertalyte PET-p ETFE - Tefzel® FEP Fluoropolymers Fiberglass-FRP Fluorosint® G10/FR4, G11/FR5, CE, LE, G5, G7, G9, XX Phenolics & Laminates Graphite HDPE HIPS-Polystyrene Hytrel® Sheets Kevlar Kydex® Lexan® LDPE LLDPE-Linear Low Mica High Temp. MDPE Tubing Neoprene Nomex Films Noryl® Nylon Nylatron® PBT PCTFE Peek Pes Sheet Petg PES Sheets PFA-Fluropolymers Plexiglas® Polycarbonate Polyester Polyimide Polypropylene Polystyrene Polysulfone Polyurethane-TPU PPS PTFE PVC PVDF Pyropel® Polyimide Rubber Products Rulon Santoprene® Silicone Teflon® Torlon® TPX Tygon® Tubing UHMWPE Ultem® PEI Versilic® Vespel® Polyimide Welding Rods Zelux® Stainless Steel, Carbon, Chrome, Tungsten, Titanium Balls Credit Application Domestic Selling Policy Contact K-mac Plastics   Hoses Metal Balls Metal Sheets, Rods, Tubes, Bars Injection Molders Database and Lists       Goods and services provided by K-mac Plastics (MI, USA). Sold by 2CheckOut.com Inc. (Ohio, USA). Plastic Links Plastic Rods, Tubes and Sheets Pinewood Derby Cars Circuit Breakers Texas Longhorns

Ultem 1000 Technical Property Data Ultem* l000 polyetherimide is an amorphous, high-performance polymer with exceptional flame and heat resistance. It performs continuously to 340°F (171°C), making it ideal for high strength/high heat applications, and those requiring consistent dielectric properties over a wide frequency range. It is hydrolysis resistant, highly resistant to acidic solutions and capable of withstanding multiple autoclaving cycles. Ultem 100 is FDA and USP Class VI compliant. FDA compliant colors of Ultem are also available on a custom basis. Ultem commonly is machined into parts for reusable medical devices, analytical instrumentation, electrical/electronic insulators and a variety of structural components requiring high strength and rigidity at elevated temperatures.   Physical Properties Metric English Comments Density 1.28 g/cc 0.0462 lb/in³  ASTM D792 Water Absorption 0.25 % 0.25 %  24 hour immersion; ASTM D570 Moisture Absorption at Equilibrium 0.2 % 0.2 %  Water Vapor Regained Water Absorption at Saturation 1.25 % 1.25 %  Immersion; ASTM D570 Outgassing - Total Mass Loss 0.4 % 0.4 %   Collected Volatile Condensable Material 0 % 0 %   Chemical Properties Ionic Impurities - Na (Sodium) 6.4 ppm 6.4 ppm   Ionic Impurities - K (Potassium) 0.1 ppm 0.1 ppm   Ionic Impurities - Fe (Iron) 0.7 ppm 0.7 ppm   Mechanical Properties Hardness, Rockwell M 112 112  ASTM D785 Hardness, Rockwell R 125 125  ASTM D785 Hardness, Shore D 86 86  ASTM D2240 Tensile Strength, Ultimate 114 MPa 16500 psi  ASTM D638 Elongation at Break 80 % 80 %  ASTM D638 Tensile Modulus 3.45 GPa 500 ksi  ASTM D638 Flexural Modulus 3.45 GPa 500 ksi  ASTM D790 Flexural Yield Strength 138 MPa 20000 psi  ASTM D790 Compressive Yield Strength 152 MPa 22000 psi  10% Deflection; ASTM D695 Machinability 30 % 30 %  QEPP 10 to 100 scale Shear Strength 103 MPa 15000 psi  ASTM D732 Compressive Modulus 3.31 GPa 480 ksi  ASTM D695 Coefficient of Friction 0.42 0.42  Dynamic; Dry vs. Steel; PTM55007 K (wear) Factor 2900 2900  10-10 in3-min/lb-ft-hr; PTM55007 Limiting Pressure Velocity 0.0657 MPa-m/sec 1875 psi-ft/min  PTM55007 Izod Impact, Notched 0.267 J/cm 0.5 ft-lb/in  ASTM D256A Electrical Properties Surface Resistivity per Square Min 1e+013 ohm Min 1e+013 ohm  EOS/ESD S11.11 Dielectric Constant 3.15 3.15  1 MHz; ASTM D150(2) Dielectric Strength 32.7 kV/mm 830 V/mil  Short Term; ASTM D149(2) Dissipation Factor 0.0013 0.0013  1 MHz; ASTM D150(2) Thermal Properties CTE, linear 68°F 55.8 µm/m-°C 31 µin/in-°F  ASTM E831 (TMA) Thermal Conductivity 0.122 W/m-K 0.85 BTU-in/hr-ft²-°F   Maximum Service Temperature, Air 171 °C 340 °F  Continuous Service Without Load Deflection Temperature at 1.8 MPa (264 psi) 204 °C 400 °F  ASTM D648 Glass Temperature 215 °C 419 °F  ASTM D3418 Flammability, UL94 V-0 V-0  UL94 Descriptive Properties Compliance - Canada AG Not Compliant   Compliance - Dairy 3A Not Compliant   Compliance - FDA Compliant   Compliance - NSF Compliant   Compliance - USDA Compliant   Compliance - USP Class VI Compliant   Service in Alcohols Acceptable   Service in Aliphatic Hydrocarbons Limited   Service in Aromatic Hydrocarbons Unacceptable   Service in Chlorinated Solvents Unacceptable   Service in Continuous Sunlight Acceptable   Service in Ethers Acceptable   Service in Inorganic Salt Solutions Acceptable   Service in Ketones Unacceptable   Service in Steam Acceptable   Service in Strong Acids Unacceptable   Service in Strong Alkalies Unacceptable   Service in Weak Acids Acceptable   Service in Weak Alkalies Acceptable

UHMWPE Cut to Size up to 6.0" Thick HDPE Colored Sheets Tapes Hoses U Channels Eyebolts Square Watermelon Growing Cases Acrylic Colored Pig Pipes

Note: Sample Charges may apply on particular non stock items! Compare Technical Differences on Plastic Properties   K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548    616-406-0671   616-406-0682 fax   Acrylic Sheets, Rods, Tubes Abs Sheets Acetal POM Sheets Nylon Rods Polypropylene Sheets Polycarbonate Tubes Pbt Sheets Pbt Sheets Tpe Santoprene Sheets