Home All Products ABS Acetals POM Delrin® Acrylic PMMA Acetate-CAB Buna Rubber Tubing Carbon Fiber Products Celazole® PBI Ceramics - Mica (High Temp) Cirlex® Polyimide CPVC ECTFE EVA Ertalyte® PET-p ETFE - Tefzel® FEP Fluoropolymers Fiberglass-FRP Fluorosint® Fluran® Tubing G10/FR4, G11/FR5, CE, LE, G5, G7, G9, XX Phenolics & Laminates Graphite HDPE HIPS-Polystyrene Hytrel® Sheets Kapton® Kevlar® Kydex® Lexan® LDPE LLDPE-Linear Low Mica High Temp. MDPE Tubing Mylar® Neoprene Nomex® Films Norprene® Tubing Noryl® Nylon Nylatron® PBT PCTFE Peek Pes Sheet Petg PES Sheets PFA-Fluropolymers Pharmed® Tubing Plexiglas® Polycarbonate Polyester Polyimide Polypropylene Polystyrene Polysulfone Polyurethane-TPU PPS PTFE PVC PVDF Pyropel® Polyimide Rubber Products Rulon® Santoprene® Silicone Sintimid® Teflon® Torlon® TPX Tygon® Tubing Tygothane® Tubing UHMWPE Ultem® PEI Versilic® Vespel® Polyimide Welding Rods Versilic® Tubing Zelux® Stainless Steel, Carbon, Chrome, Tungsten, Titanium Balls Credit Application Domestic Selling Policy Contact Kmac Plastics Privacy Hoses Metal Balls Metal Sheets, Rods, Tubes, Bars       Goods and services provided by K-mac Plastics (MI, USA). Sold by 2CheckOut.com Inc. (Ohio, USA). Plastic Links Plastic Rods, Tubes and Sheets Pinewood Derby Cars Circuit Breakers Texas Longhorns Drill Bits Set Screws Taper Pins

UHMWPE Typical Properties Specific Gravity, 73°F .944   Tensile Strength @ Yield, 73°F 3250 psi Tensile Modulus of Elasticity, 73°F 155,900 psi Tensile Elongation (at break), 73°F 330 % Flexural Modulus of Elasticity 107,900 psi Compresive Strength at 2% deformation 400 psi Compressive Strength 10% Deformation 1200 psi Deformation Under Load 6-8 % Compressive Modulus of Elasticity, 73°F 69,650 psi Hardness, Durometer (Shore "D" scale) 69   Izod Impact, Notched @ 73°F 30 ft.lbs./in. of notch Coefficient of Friction (Dry vs Steel) Static .17   Coefficient of Friction (Dry vs Steel) Dynamic .14   Sand Wheel Wear/Abrasion Test 95 UHMW=100 Coefficient of Linear Thermal Expansion 11.0 in/in/°F x 10-5 Melting Point (Crystaline Peak) 279-289 °F Volume Resistivity >1015 ohm-cm Surface Resistivity >1015 ohm-cm Water Absorption, Immersion 24 Hours Nil % Water Absorption, Immersion Saturation Nil % Machinability Rating 5 1 = easy, 10 = difficult Sheet Thickness Availability (Off the Shelf) .250 - 2.0 inches

UHMWPE Cut to Size up to 6.0" Thick HDPE Colored Sheets Tapes Hoses U Channels Eyebolts Threaded Rods Self Drilling Screws Carriage Bolts Dowel Pins Lag Screws Spring Pins   Springs Machine Screws Tube Caps & Plugs Square Watermelon Growing Cases Acrylic Colored Pig Pipes

Note: Sample Charges may apply on particular non stock items! Compare Technical Differences on Plastic Properties   K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548  Privacy   Contact Kmac Plastics    Domestic Selling Policy 616-406-0671   616-406-0682 fax   Acrylic Sheets, Rods, Tubes Abs Sheets Acetal POM Sheets Nylon Rods Polypropylene Sheets Polycarbonate Tubes Pbt Sheets Pbt Sheets Tpe Santoprene Sheets