Home All Products ABS Acetals POM Delrin® Acrylic PMMA Acetate-CAB Buna Rubber Tubing Carbon Fiber Products Celazole® PBI Ceramics - Mica (High Temp) Cirlex® Polyimide CPVC ECTFE EVA Ertalyte® PET-p ETFE - Tefzel® FEP Fluoropolymers Fiberglass-FRP Fluorosint® Fluran® Tubing G10/FR4, G11/FR5, CE, LE, G5, G7, G9, XX Phenolics & Laminates Graphite HDPE HIPS-Polystyrene Hytrel® Sheets Kapton® Kevlar® Kydex® Lexan® LDPE LLDPE-Linear Low Mica High Temp. MDPE Tubing Mylar® Neoprene Nomex® Films Norprene® Tubing Noryl® Nylon Nylatron® PBT PCTFE Peek Pes Sheet Petg PES Sheets PFA-Fluropolymers Pharmed® Tubing Plexiglas® Polycarbonate Polyester Polyimide Polypropylene Polystyrene Polysulfone Polyurethane-TPU PPS PTFE PVC PVDF Pyropel® Polyimide Rubber Products Rulon® Santoprene® Silicone Sintimid® Teflon® Torlon® TPX Tygon® Tubing Tygothane® Tubing UHMWPE Ultem® PEI Versilic® Vespel® Polyimide Welding Rods Versilic® Tubing Zelux® Stainless Steel, Carbon, Chrome, Tungsten, Titanium Balls Credit Application Domestic Selling Policy Contact Kmac Plastics Privacy Hoses Metal Balls Metal Sheets, Rods, Tubes, Bars       Goods and services provided by K-mac Plastics (MI, USA). Sold by 2CheckOut.com Inc. (Ohio, USA). Plastic Links Plastic Rods, Tubes and Sheets Pinewood Derby Cars Circuit Breakers Texas Longhorns Drill Bits Set Screws Taper Pins

Celazole Technical Data Physical Properties Metric English Comments Density 1.3 g/cc 0.047 lb/in³  ISO 1183 Water Absorption 0.5 % 0.5 %  24 hour immersion; ISO 62 Water Absorption 1.06 % 1.06 %  96 hour immersion; ISO 62 Mechanical Properties Tensile Strength, Ultimate 160 MPa 23200 psi  ISO 527 Elongation at Break 3 % 3 %  ISO 527 Tensile Modulus 5.8 GPa 841 ksi  ISO 527 Compressive Yield Strength 42 MPa 6090 psi  at 1% nominal strain; ISO 604 Compressive Yield Strength 82 MPa 11900 psi  at 2% nominal strain; ISO 604 Charpy Impact, Notched 0.35 J/cm² 1.67 ft-lb/in²  ISO 179/1eA Electrical Properties Electrical Resistivity 1e+014 ohm-cm 1e+014 ohm-cm  IEC 93 Surface Resistance Min 1e+012 ohm Min 1e+012 ohm  IEC 93 Dielectric Constant 3.3 3.3  1 MHz; IEC 250 Dielectric Constant, Low Frequency 3.3 3.3  100 Hz; IEC 250 Dielectric Strength 22 kV/mm 559 kV/in  IEC 243 Dissipation Factor, Low Frequency 0.001 0.001  100 Hz; IEC 250 Thermal Properties CTE, linear 20°C 25 µm/m-°C 13.9 µin/in-°F  average value between 23 and 100°C CTE, linear 100°C 25 µm/m-°C 13.9 µin/in-°F  average value between 23 and 150°C Thermal Conductivity 0.4 W/m-K 2.78 BTU-in/hr-ft²-°F   Maximum Service Temperature, Air 310 °C 590 °F  20,000 hours continuous Maximum Service Temperature, Air 500 °C 932 °F  for short periods Deflection Temperature at 1.8 MPa (264 psi) 425 °C 797 °F  ISO 75 method A Flammability, UL94 V-0 V-0  1.5 mm thickness Flammability, UL94 V-0 V-0  3 mm thickness Oxygen Index 58 % 58 %  ISO 4589

UHMWPE Cut to Size up to 6.0" Thick HDPE Colored Sheets Tapes Hoses U Channels Eyebolts Threaded Rods Self Drilling Screws Carriage Bolts Dowel Pins Lag Screws Spring Pins   Springs Machine Screws Tube Caps & Plugs Square Watermelon Growing Cases Acrylic Colored Pig Pipes

Note: Sample Charges may apply on particular non stock items! Compare Technical Differences on Plastic Properties   K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548  Privacy   Contact Kmac Plastics    Domestic Selling Policy 616-406-0671   616-406-0682 fax   Acrylic Sheets, Rods, Tubes Abs Sheets Acetal POM Sheets Nylon Rods Polypropylene Sheets Polycarbonate Tubes Pbt Sheets Pbt Sheets Tpe Santoprene Sheets