Home All Products ABS Acetals POM Delrin® Acrylic PMMA Acetate-CAB Buna Rubber Tubing Carbon Fiber Products Celazole® PBI Ceramics - Mica (High Temp) Cirlex® Polyimide CPVC ECTFE EVA Ertalyte® PET-p ETFE - Tefzel® FEP Fluoropolymers Fiberglass-FRP Fluorosint® Fluran® Tubing G10/FR4, G11/FR5, CE, LE, G5, G7, G9, XX Phenolics & Laminates Graphite HDPE HIPS-Polystyrene Hytrel® Sheets Kevlar® Kydex® Lexan® LDPE LLDPE-Linear Low Mica High Temp. MDPE Tubing Mylar® Neoprene Nomex® Films Norprene® Tubing Noryl® Nylon Nylatron® PBT PCTFE Peek Pes Sheet Petg PES Sheets PFA-Fluropolymers Pharmed® Tubing Plexiglas® Polycarbonate Polyester Polyimide Polypropylene Polystyrene Polysulfone Polyurethane-TPU PPS PTFE PVC PVDF Pyropel® Polyimide Rubber Products Rulon® Santoprene® Silicone Sintimid® Teflon® Torlon® TPX Tygon® Tubing Tygothane® Tubing UHMWPE Ultem® PEI Versilic® Vespel® Polyimide Welding Rods Versilic® Tubing Zelux® Stainless Steel, Carbon, Chrome, Tungsten, Titanium Balls Credit Application Domestic Selling Policy Contact K-mac Plastics   Hoses Metal Balls Metal Sheets, Rods, Tubes, Bars Injection Molders Database and Lists       Goods and services provided by K-mac Plastics (MI, USA). Sold by 2CheckOut.com Inc. (Ohio, USA). Plastic Links Plastic Rods, Tubes and Sheets Pinewood Derby Cars Circuit Breakers Texas Longhorns

Property Units Test Method ASTM Value Light transmitance % - 93- Refractive Index % - - Haze (initial) % - .5 Haze (24 days, 104 °F) % - - Specific Gravity - D792 - Water Absorption (24 Hours) % D570 0. 3 Water Absorption (Saturation) % D570 - Tensile Strength (73 °F) PSI D638 10,500 Flexural Strength (73 °F) PSI D790 16,000 Compressive Strength (10% Deflection) PSI D695 - Shear Strength (73 °F) PSI D732 - Impact Strength, Notched Izod (73 °F) Ft-lb./In. D256 .3 Elongation at Break (73 °F) % D638 - Tensile Modulus of Elasticity (73 °F) PSI D638 - Flexural Modulus of Elasticity (73 °F) PSI D790 450,000 Hardness - Rockwell & Burnell (73 °F) Various Scales D785 M102 Density Lbs./In - 0.044 Coefficient of Friction None - - Wear Factor (K) In -min./Ft.-Lb.-Hr. - - Limiting PV PSI. FPM - - Abrasion Resistance Index None - - Coefficient of Linear Thermal Expansion In/In/ F D696 4 x 105 Continuous Service Temperature - In Air (max.) F - 150 Deflection Temperature (264 PSI) F D648 225 Melting Point F D789 - Deformation Under Load (2000 PSI, 122 °F) % D621 - Dielectric Strength Volts/Mil D149 - Volume Resistively Ohm-CM D257 - Dielectric Constant (60 Hz) None D150 - Dielectric Constant (1 kHz) None D150 - Dielectric Constant (1 MHz) None D150 -

UHMWPE Cut to Size up to 6.0" Thick HDPE Colored Sheets Tapes Hoses U Channels Eyebolts Square Watermelon Growing Cases Acrylic Colored Pig Pipes

Note: Sample Charges may apply on particular non stock items! Compare Technical Differences on Plastic Properties   K-Mac Plastics  3821 Clay Ave. SW, Wyoming, MI  49548    616-406-0671   616-406-0682 fax   Acrylic Sheets, Rods, Tubes Abs Sheets Acetal POM Sheets Nylon Rods Polypropylene Sheets Polycarbonate Tubes Pbt Sheets Pbt Sheets Tpe Santoprene Sheets